Model:YRTS395

ID(Inner diameter):395mm

OD(Outer diameter):525mm

Thickness(Height):65mm

Axial dynamic load rating(Ca):214KN

Axial static load rating(Coa):1540KN

Raial dynamic load rating(Cr):121KN

Raial static load rating(Cor):390KN

Limiting speed:600r/min

Mass(Weight):33KG

YRTS395 applied on high speed rotary tables, milling head YRTS395 precision: P4(runout≤6μm); P2(runout≤3um)

YRTS395 applied on high speed rotary tables, milling head YRTS395 are preloaded before leaving the factory, it is necessary for customer to tell us the requirement torque, then we will adjust it to the right torque before leaving factory.(HONBbearing05)

YRTS high speed bearings Are as same as YRT basic rotary table bearings, designed with two axial Component and a radial component: axial component contains two axial cylinder roller cage assembles, an out ring, a L-section inner ring and A second ring. Axial Preloaded after fitting. Radial component contains a cylinder roller cage assembles, radial preload also added after Fitting. the out ring, L-section inner ring and the second ring have fixing Hole. the unit is located by means of retaining screws for the safety of transport and handling.

the dimension, shape, and Structure of YRTS high speed bearings are as same as YRT basic rotary table bearings. Due to it's Special inner design, this kind of bearing have higher limiting speed and lower and uniform friction torque in the whole speed range. so they can Be applicated to the situation which need lower friction and higher speed. Such as Direct drive shaft, especially for the CNC rotary table structure. (HONBbearing05)