Main Functions:

1. Single Locating
2. Get absolute street address     Note: You must set up the APN of your local GSM network for the SIM card in tracker first before using this function.
3. Auto Track
4. Location based service (LBS)
    When the tracker device doesn’t received valid GPS signals, tracker will locate by LBS, the messages includes the GPS 
    coordinates of the last position in SMS mode, but the LAC in message is the current new position, the location can be seen by 
    input the LAC code in the menu “Manual Track” of web platform www.gpstrackerxy.com, you can also send command 
    “address+password” to tracker to get the newest absolute address and newest GPS coordinates as well; tracker will       
    automatically switch to track by location based service in GPRS mode, and actualized on the map of web server with LBS mark. 
    And there may be some inaccuracy with actual location by LBS tracking; the bias depends on GSM reception.  
    Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some 
    areas.
5. Monitor (Voice Surveillance)
    The default mode is “track” (Track mode). Send SMS “monitor+password” to the unit, and it will reply “monitor ok!” and switch to 
    “monitor” mode.
6. Storage
    Built-in flash 1MB (store about 16,000 positions); external SD card support 2GB at most.
7. Data Logging 
8. Data Load
9. Shock sensor alarm
10. Geo-fence
11. Movement alert
12. Overspeed alert
13. SOS alert
14. Low battery alert
15. Sleep Mode
       a. Sleep by time 
       Send "sleep+password+space+time", tracker will reply "sleep time ok" if none of the alarms listed under chapter IV has been 
       set and no operations, tracker will fall asleep in 5 minutes, LED will be off, calling or SMS can awake the tracker. If these alarms 
       have been set, tracker will enter sleep by detecting shock sensor. And tracker will sleep by time as default.

       b. Sleep by shock sensor 
       Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode after detect no shock, and 
       LED will be off.
16. State Checking
17. IMEI checking
18. Terminal (local) Time Setting
19. Free PC installation tracking software
20. Micro SD Card Slot
21. GPS drift suppression
       The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates 
       automatically when vehicle is moving.
22. Forward the third parties’ message
      Send SMS "forward+password+space+third parties phone number" from authorized phone number, tracker will reply "forward 
      ok", and supports 1 third parties phone numbers at most. For example, set the phone number of the service provider of the 
      sim card in the tracker, when charge remind message coming in, tracker will forward it to authorized phone number.
23. TCP/UDP switch
24. Configure parameters by USB
       Find the USB cable in the package to connect tracker with computer, open the memory of the tracker, find and open the initial 
       configuration file with notepad, operate according the instructions.
       Note: Correct password is need every time you configure the tracker. For detailed instructions, please refer to the “102 USB 
       configuration user manual” in CD.

25. Less GPRS traffic
       Tracker will change to less GPRS traffic mode & sleep by shock sensor mode after parking 5 minutes, GPRS disconnect and 
       connect again when alarm being triggered or start driving.
26. Setup monitor center number
       If monitor center number doesn’t setup, auto track messages will be sent to the cell phone which send this command.

 

Package

 

standard accessories:

GPS Tracker x 1
Rechargeable Battery x 2
Power Adapter for Charging x 1  
BatteryDock x 1
English User Guide x 1
Extra Back Cover with Magnet x 1
Plastic Carrying Bag x 1
USB cable
Optional accessories
Hardwired car charger
Cigarette lighter car charger
Microsd memory card